| |
|
|
| |
 |
|
| |
Check Valve: |
| |
| "HORIZONTAL" CHECK VALVE - SCREWED / FLANGED END: |
| |
Size : 1/2" to 4 " (15 MM to 100 MM)
Specification : Screwed in Cover, Integral Seat
Design & Manufacturing Standard : BS 5154
Body, Bonnet : ASTM A 351 Gr. CF8 / CF8M / GM
Ends : Screwed / Flanged
Test Pressure :
Body - 450 psig
Seat - 325 psig
Optional Ends :
Flanged to ANSI B 16.5 Rf (150#)
Flanged to BS 10 Table D / F
Other Material & Specification are welcome |
 |
| |
| |
| "VERTICAL" CHECK VALVE - SCREWED / FLANGED END: |
| |
Size : 1/2" to 4 " (15 MM to 100 MM)
Specification : Single Piece in Design, Integral Seat
Design & Manufacturing Standard : BS 5154
Body, Bonnet : ASTM A 351 Gr. CF8 / CF8M / GM
Ends : Screwed / Flanged
Test Pressure :
Body - 450 psig
Seat - 325 psig
Optional Ends :
Flanged to ANSI B 16.5 Rf(150#)
Flanged to BS 10 Table D / F
Other Material & Specification are welcome |
 |
| |
| |
| "DISC, NON-SLAM TYPE " CHECK VALVE - SCREWED END: |
| |
Size : 1/2" to 4 " (15 MM to 100 MM)
Design & Manufacturing Standard : As Per Manufacturing Standard
Pressure Test Standard : As Per Manufacturing Standard
Body : ASTM A 351 Gr. CF8 / CF8M
Ends : Screwed
Test Pressure :
Body - 580 psig
Seat - 300 psig
Other Material & Specification are welcome |
 |
| |
| |
| "WAFER TYPE " CHECK VALVE - SCREWED / FLANGED END: |
| |
Size : 1/2" to 24 " (25 MM to 600 MM)
Design & Manufacturing Standard : As Per Manufacturing Standard
Pressure Test Standard : BS 6755
Body & Disc: Cast iron / Carbon Steel / Aluminium Bronze / GM / ASTM A 351 Gr. CF8 - CF8M / ASTM A 216 Gr. WCB
Liner : NBR, PTFE
Pin : AISI A 182 F 410 / 304 / 316
Ends : Wafer type suitable flanges to Class150#, BS 10 Table D / E / F
Test Pressure :
Body - 165 psig
Seat - 225 psig
Other Material & Specification are welcome |
 |
| |
|
